Keysight N991xA Analyzer Driver
On the NxA or NxA analyzers, order Options and to obtain a 4 04 Keysight FieldFox Handheld Analyzers - Configuration Guide FieldFox RF. 02 Keysight FieldFox Handheld Analyzers 4//9/14/18//32/44/50 GHz .. Low power level for NxA and NxA analyzers is a lat dBm across the. FieldFox delivers KEYSIGHT-quality measurements – wherever you need to go. NxA Vector Network Analyzer Transmission/Reflection, recomend.
|Supported systems:||Windows XP/Vista/7/8/10, MacOS 10/X|
|Price:||Free* [*Free Registration Required]|
Keysight N991xA Analyzer Driver
This has the added benefit that the measurements are shown slower, making it easier for Keysight N991xA Analyzer human eye to decipher the signal content. Necessary if Option is ordered The trigger cables and LAN cables must be at least as long as the separation distance between the two ends of the DUT. What USB power sensors work with Option ?
Maximum bandwidth is MHz. Keysight N991xA Analyzer hardware USB power sensor required None. Since the measurement is within a certain frequency channel or bandwidth, to make an accurate measurement, the user needs to know the exact center frequency and the signal s bandwidth and set those accurately. If a RF jumper cable is used, the user needs to account for the loss of the cable with an offset value can be entered into the analyzer.
It cannot be used to increase the frequency accuracy of the instrument. What is Option Remote 1 Option provides a license for FieldFox to allow remote control via an ios device.
- Thomas Industry Update
Average power sensors cannot be used with Optiononly peak power sensors. The peak power sensor needs to be purchased separately.
What measurement capabilities Average power, peak power, and peak to average ratio are included with Option ? With Option added, you can make swept-frequency power measurements. You can plot source power, gain, and receive power versus frequency. Additionally, the source frequency can be offset from the receiver frequency. The power sensor needs Keysight N991xA Analyzer be purchased separately.
Keysight Technologies FieldFox Handheld Analyzers - PDF
Additional functionality such as full 2-port S-parameters can be added using the options listed below. What is included with a base NxA analyzer?
What additional functionality is available? Additional FAQs on pages 8 and 9.
Keysight Technologies FieldFox Handheld Analyzers
To get time domain data for all four S-parameters and full 2-port cal, order Option View both time and frequency domain data at the same time Low-pass, impulse, and band-pass modes Keysight N991xA Analyzer, normal, and maximum window Gating Measurements: TDR measurements require Optionin addition to Option The features listed below are often used for distance-to-fault cable testing and are only available in CAT mode: FAQs on pages 8 and 9 apply to all microwave FieldFox models.
Option is only available at time of purchase.
Keysight N991xA Analyzer is not available as an upgrade. The spectrum analyzer can be tuned to 5 khz. Order Option for 3. With NA, the spectrum analyzer is built with 3.
Option is a prerequisite for Option for NA. See page 6, FAQ 13 4.
What is included with the basic Keysight N991xA Analyzer Basic spectrum analysis, four traces, different detector types, radio standard selection, limit lines analyzer? Interference analyzer and spectrogram Trace playback and recording 3. FieldFox analog demodulation has two parts: See page 6, FAQ 10, for a detailed description of the system requirements. See page 6, FAQ Options can be added after your initial purchase.